Cleaning And Replacing The Filters - Trane MERCURY EDAB 1105A Technical Manual

Cleaning and replacing the filters

To clean and replace the filters carry out the following
procedure:
• open the front panels of the machine;
MODELS WITH REAR AIR INTAKE
• follow the instructions below and check the direction of
the air flow indicated with a sticker on each filter;
• clean them using a blast of compressed air or replace
them;
• reposition the filters in the unit checking the direction of
the air flow which was previously noted.
MODELS WITH HIGH INTAKE (MOD. EDCB/EDCV 0340-
0400)
• remove the filter blocking supports;
• remove the filters checking the direction of the air flow
indicated with a sticker on each filter;
• clean them using a blast of compressed air or replace
them;
• reposition the filters in the unit checking the direction of
theair flow which was previously noted;
58
OTHER MODELS
• remove the filter blocking supports;
• remove the filters checking the direction of the air flow
indicated with a sticker on each filter;
• clean them using a blast of compressed air or replace
them;
• reposition the filters in the unit checking the direction of
theair flow which was previously noted;
• reposition the filter blocking supports.
PKG-SVX19B-E4