Door Opening And Removal Of The Panels; Door Opening - Trane MERCURY EDAB 1105A Technical Manual

Installation of the mounting frame
To install the unit on raised flooring using the mounting frame,
carry out the following procedures:
• a flexible seal at least 5 mm thick should be fitted
between the raised floor panels and the mounting frame
which should also be isolated from the metallic floor
structure;
• position the unit of the mounting frame and fix it using
the M8 screw inserts found on the base of the unit.
Air conditioning unit
Raised
floor
Flexible seal
Installation on flooring which is not raised
Installation on flooring which is not raised can occur without
using bases, but only on upflow models
(upwards air flow) with rear or frontal air intake. Installation
on this type of floor does not require any additional operation
besides that of normal positioning.
Installation of the floor stand
To install the unit on the floor stand, carry out the following
procedures:
• position the unit on the floor stand;
• fix the unit to the floor stand using the M8 screw inserts
found on the base of the unit.
18
Mounting
frame
Flexible seal
Base of unit
Floor stand

Door opening and removal of the panels

Door opening

To open the door of the unit, carry out the following
procedure:
• push the button and pull the handle lightly outwards;
• turn the handle downwards until the door opens.
Removal of the front and side panels
To remove the front and side panels, carry out the following
procedure:
• firmly hold the panel;
• lift and incline the panel outwards until it is completely
removed.
NOTE: After having removed the side panels, the non-
removable protective panel, blocks accessibility to the inside
of the machine.
Removal of the rear panels
To remove the rear panels, carry out the following
procedure:
• unscrew, using a star screwdriver, the screws which fix
the panel;
• firmly hold the panel and pull.
PKG-SVX19B-E4