Internal Protection Panels - Trane MERCURY EDAB 1105A Technical Manual

NOTE: After having removed the side panels, the non-
removable protective panel, blocks accessibility to the inside
of the machine.
Removal of the rear panels
To remove the rear panels, carry out the following
procedure:
• unscrew, using a star screwdriver, the screws which fix
the panel;
• firmly hold the panel and pull.

Internal protection panels

The technical compartment, the electric heaters and the
autotransformer fans are protected by internal protection
panels for safety reasons and to allow the opening of the
external panels without triggering the unit's safety alarms.
In the figures below the different types of internal protection
panels are shown on various types of machines.
PKG-SVX19B-E4
MODELS EUCB - EUCV 0070, 0100, 0120, 0170,0200,
0250
MODELS EDCB - EDCV 0070, 0100, 0120, 0170,0200,
0250, 0270
MODELS EDCB 0340, 0400, EDCV0340, 0400
Before removing the internal protection panels,
disconnect the power supply by turning the main isolating
switch D5 to position "O", then wait until the fans stop and
the electrical heaters cool down.
47