Panasonic CF-T2 Series Reference Manual page 83

External Display
The following actions may result in distortion of the display. If this occurs, restart the
computer.
• When an external display with a high resolution or high refresh rate setting is
disconnected.
• When an external display is connected or disconnected while the computer is
operating.
When the computer is set to display on both the internal LCD and the external display,
MPEG files and other video files may not be played back smoothly.
Carefully read the operating instructions of the external display.
When connecting a monitor that does not conform to the Plug & Play standards:
Either select the correct external display driver use in the following menu, or use the
driver disk that was supplied with your monitor.
A
Display [Display Properties].
Click [start] - [Control Panel] - [Appearance and Themes] - [Display].
B
Click [Settings] - [Advanced] - [Monitor] - [Properties] - [Driver] - [Update Driver].
If a picture is not displayed properly:
A Display [Display Properties]. (Refer to step
B Click [Settings] - [Advanced] - [Troubleshoot], and lower the level of [Hardware
acceleration].
83
A above.)