Security Menu - Panasonic CF-T2 Series Reference Manual

Setup Utility

Security Menu

Password on boot
• Select whether you will need to input ([Enable]) or not ([Disable]) the Supervisor Password or
the User Password on booting.
SD Startup
• Select whether to use an SD memory card instead of entering the password on booting
([Enable]) or not ([Disable]).
• When registered SD memory card, this is set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable].
SD Setting Method
• Select whether to set an SD memory card to [Leave Set] or [Set and Eject] when an SD
memory card is used instead of entering the password.
• This can be set only if [SD Startup] has been set to [Enable].
• Cannot be set when [Password on boot] is set to [Disable].
Clear registered SD card
• Clear the registration from all registered SD memory cards not to be used instead of entering
the password on booting.
NOTE
When the Setup Utility is started up with the User Password:
• [Clear registered SD card], [Set Supervisor Password] and [Hard Disk Lock] will not
be displayed.
• [Password on boot], [SD Startup], [SD Setting Method], [Setup Utility Prompt], [Boot
First Menu] and [User Password Protection] will be displayed, but cannot be set.
• The User Password can be changed only when [User Password Protection] has
been set to [No Protection]. The User Password cannot be deleted.
• [SD Startup], [SD Setting Method] and [Clear registered SD card] will be displayed
only when an SD memory Card has been registered. ( page
(An underline indicates the factory default settings)
116
72)
Disable
Enable
Disable
Enable
Leave Set
Set and Eject
To the sub-menu