Panasonic CF-T2 Series Reference Manual page 71

SD Memory Card Security Function
Before Initialization (SD Card Setup)
When you initialize an SD memory card, you can insert it, instead of entering a password, in
the following cases.
When starting the computer
Set the SD memory card
Windows log-on screen appears
NOTE
Without using the SD memory card, you can also start your computer or log-on to
Windows by entering the correct password.
This security function can only be used with SD memory cards. The security function
cannot be used with MultiMedia cards.
To use when starting the computer:
Set the Supervisor Password in the Setup Utility (
the initialization procedure.
To use when logging on to Windows/resuming from the standby or hibernation
mode, or while the screensaver is active:
The Windows log-on user and password must be set in [Control Panel] in advance.
( page 59)
When logging on to Windows/
resuming from the standby or
hibernation mode, or while the
screensaver is active
Windows log-on screen
Set the SD memory card
Windows desktop appears
page 54). You can also set it during
71