Panasonic CF-T2 Series Reference Manual page 145

Problems with Input
Pressing a letter key produces a number
Only capital letters are being input
How to input European characters (ß, à, ç etc.), symbols or Euro
currency symbol is unclear
Combined key operations with the Fn key do not work
Cannot input by touching the display
The computer may be in ten-key mode.
lights up, press the NumLk key, to disable the ten-key mode, and then input.
If
The computer may be in Caps Lock mode.
lights up, press the Caps Lock key, to disable the Caps Lock mode, and then
If
input.
With the following procedure, enter a character using the code table.
A Click [start] - [All Programs] - [Accessories] - [System Tools] - [Character
Map].
B
Point to the desired font name, such as European fonts, and select it.
Check whether [Fn/Ctrl Key] is set to [Replace] in the [Main] menu of the Setup Utility.
( page 113).
Change the setting back to [Normal], or if continuing with [Replace] selected, use the
Ctrl key in place of the Fn key.
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be
used. Install the touchscreen driver again.
Has the touchscreen driver been properly installed?
145