Panasonic CF-T2 Series Reference Manual page 148

Problems with Peripherals
Your peripheral does not work
An error occurs while installing the driver
Check that the drivers are installed for the connected devices.
A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].
B Check whether
If is shown:
Try removing and inserting the device once more. If the problem persists,
restart the computer.
Check the peripheral manufacturer's homepage or other sources to see if a driver update
is available.
After installing the driver, be sure to restart the computer.
Depending on the device connected, the computer may not recognize when the device is
connected or disconnected, or the device may not operate properly.
Use the following procedure:
A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager].
B
Select the applied device, and remove the check mark for [Allow the computer to
turn off this device to save power] in [Power Management]. (This item may be
unavailable for some types of devices.)
When operation resumes from the standby or hibernation mode, devices such as an
external mouse, modem or PC Cards may not function properly. In such cases, restart
your computer.
If it still does not work after checking the above items, consult the peripheral manufacturer.
Check that the driver is supported by the operating system. If you use an incompatible
driver, malfunction may occur. For a driver, consult the manufacturer of the peripheral you
are using.
is shown for the devices.
148