Panasonic CF-T2 Series Reference Manual page 14

Using the Touch Pad
Using the Virtual Scrolling Function
Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be
disabled.
1
Click on the
If the icon is not displayed, click on [start] - [All Programs] - [Panasonic] - [Touch
Pad utility settings].
If a message appears, indicating that the Touch Pad utility is not yet running, click
[start] - [All Programs] - [Panasonic] - [Touch Pad utility settings], and display the
icon.
2
Remove a check mark from [Use Touch Pad function] in [General set-
tings], and then click [OK].
The icon on the notification area will change to the
3
Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse] - [Device Settings].
4
Click the device name in [Devices] (e.g., Synaptics TouchPad), then
click [Settings].
icon on the notification area, and click [Settings].
14
icon.