Panasonic CF-T2 Series Reference Manual page 117

Setup Utility
Set Supervisor Password
• Set a Supervisor Password if you wish to prevent any unauthorized changes to the Setup Utility
settings, also if you require a password on boot, set [Password on boot] to [Enable] after you set
Supervisor Password.
Setup Utility Prompt
• Select whether to display ([Enable]) or not to display ([Disable]) the message "Press F2 for
Setup/F12 for LAN" shown on the bottom of the [Panasonic] boot screen that is displayed after
starting this computer.
Boot First Menu
• Select whether to display "Boot Menu" ([Enable]) or not ([Disable]). (
Hard Disk Lock
• Select whether enable ([Enable]) or disable ([Disable]) the hard disk lock.
• This function will not work without the Supervisor Password being set.
User Password Protection
• Select whether to permit changing the User Password ([Protected]) or not ([No Protection]).
Set User Password
• Set User Password when multiple users use this computer, etc.
For example, when the system administrator sets Supervisor Password and User Password and
lets other users know only the User Password, other users cannot change some of the settings
in Setup Utility.
• This function will not work without the Supervisor Password being set.
(An underline indicates the factory default settings)
page 118)
117
To the sub-menu
Disable
Enable
Disable
Enable
Disable
Enable
No Protection
Protected
To the sub-menu