Technical Specifications - Cisco CDE 220 Series Hardware Installation Manual

Technical Specifications

This appendix provides the technical specifications and management information for the CDE205,
CDE220, CDE280, CDE285, CDE420, CDE460, and CDE475.
This appendix contains the following sections:
•
•
•
•
•
•
•
•
•
•
CDE205 Specifications
Table A-1
Table A-1
Rack Units
Power
AC Power Rating
DC Power Rating
AC Electrical Input
CDE205 Specifications, page A-1
CDE220 Specifications, page A-2
CDE280 Specifications, page A-3
CDE285 Specifications, page A-4
CDE420 Specifications, page A-5
CDE460 Specifications, page A-6
CDE475 Specifications, page A-7
CDE Management, page A-7
CDE Management, page A-7
CDE Heat Rate Load, page A-8
lists the technical specifications and management information for the CDE205.
CDE205 Specifications
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
A P P E N D I X
2
100 to 240 VAC or –48 VDC single power supply; optional
redundant power supply available
800 W peak
710 W peak
AC input voltage low range—Minimum: 100 VAC,
•
Maximum:127 VAC
AC input voltage high range—Minimum: 200 VAC,
•
Maximum: 240 VAC
See the "If AC Power Supplies Are Installed" section on page
A
2-9.
A-1