Advertisement
7. After batteries are charged, insert battery into panel. Turn panel over with battery compartment facing up.
a. Slide battery into the Panel at a slight angle mating the charging connector with the battery
connector. While sliding the battery, check alignment of the charging connector with the
battery connector.
b. Let battery fall into place, then slide the two (2) locking latches to secure the battery in the panel.
VZ0001HTG201507-2.6
Customer Support
ViZion DR + Install Guide v2.6
1.800.366.5343 –
HCITsupport@konicaminolta.com
3
Opal UAI 2.3.x.x
Advertisement
