Advertisement
PC Setup
1. Open PC Box.
2. Remove Key Board and Accessories box.
3. Remove PC and place PC in X-ray work area.
4. Plug Keyboard into PC USB port.
5. Plug Mouse into PC USB port.
6. Connect On Board Lan port to
site Local Area internet network
(wall network port).
7. Connect riser network card to
LAN port on wireless access
point (yellow ports on ASUS
wireless AP).
8. Connect monitor to VGA port on PC.
9. Plug power cable into PC and plug
power cable into wall outlet.
10. Power on Monitor.
11. Power on PC.
Reference Quick
wiring guide on next
page.
VZ0001HTG201507-2.6
Customer Support
ViZion DR + Install Guide v2.6
1.800.366.5343 –
HCITsupport@konicaminolta.com
9
Opal UAI 2.3.x.x
Advertisement
