Tuner Setting - Panasonic PV-D744S Operating Instructions Manual

Tuner setting

This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the DVD/VCR's memory. In addition to normal VHF and UHF channels, this DVD/
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
NOTE:
You can't select "CH SETUP" if you set
the channel to "LINE 1" or "LINE 2".
22
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
TV/CATV selection
1
Press VCR MENU. The VCR menu screen will appear. Press
SET + or – to select "CH SETUP", then press ENTER.
2
Press SET + or – to select the
"TV/CATV" option.
3
Then press ENTER to select the
TV or CATV mode. The arrow
indicates the selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
4
Press VCR MENU until the menu screen is cleared.
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
1
Repeat above step 1 and press
SET + or – to select "AUTO CH
MEMORY".
2
Then press ENTER.
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
á ñ
CH SETUP
TV CATV
AUTO CH MEMORY
ADD/DELETE
+/-/ENTER/MENU
CH 002