Setting The Video Channel; Setting The Language - Panasonic PV-D744S Operating Instructions Manual

Setting the video channel / Setting the language

Setting the video channel

To view playback of a recorded tape or
DVD disc, or to watch a program selected
by the VCR's channel selector, the TV must
be set to channel 3 or 4 (video channel).
NOTE:
When shipped from factory, the video
channel is set to CH 3.
When a TV is connected with the 75 ohm coaxial cable only.
1
Press and hold 3 or 4 on the remote
control for 3 seconds in the standby
mode to select CH 3 or 4. The selected
channel number will flash on the display for about 4 seconds.
2
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 1.
3
Press POWER to turn on the DVD/VCR.
4
Press VCR/DVD to select the VCR mode. The VCR indicator
on the front panel will light.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.

Setting the language

You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
1
Press VCR MENU.
The VCR menu screen will appear. Press SET + or – to select
the "SYSTEM SETUP" menu, then
press ENTER.
If you use the unit for the first time
and press VCR MENU, instead of
the main menu screen on the right
the "SYSTEM SETUP" menu
screen in step 2 may appear.
2
Press SET + or – to select the
"LANGUAGE" option, then press
ENTER.
3
Press SET + or – to select the
desired language: English (EN-
GLISH), Spanish (ESPAÑOL) or
French (FRANCAIS), then press
ENTER.
4
Press VCR MENU until the MENU screen is cleared.
MENU
TIMER REC SET
ON OFF
AUTO REPEAT
SAP ON OFF
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
WEAK SIGNAL DISPLAY
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á ñ
21