Marking Desired Scenes - Panasonic PV-D744S Operating Instructions Manual

The unit stores the points that you
want to watch again up to 3 points.
You can resume playback from
each scene.
NOTES:
• Some discs may not work with the
marking operation.
• The marking is canceled when you
open the disc tray or turn the power off.
•
Some subtitles recorded around the
marker may fail to appear.

Marking desired scenes

Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the DVD mode. (The DVD indicator
will light.)
Marking the scenes
1
Press MARKER during
playback.
2
Select the blank Marker using
/ .
Then press ENTER at the desired
scene.
• Repeat this procedure to set
the other 2 scenes.
3
Press MARKER to remove this display.
Returning to the scenes
1
Press MARKER during playback
or stop mode.
2
Press / to select the Marker
1-3.
3
Press ENTER.
Playback starts from the marked scene.
To cancel the mark
1
Press MARKER.
2
Press / to select the Marker 1-3.
3
Press CANCEL.
To remove this display, press MARKER.
Marker 1
Marker 2
Marker 3
/Enter/Cancel/Marker
Marker 1
00 27 54
Marker 2
Marker 3
/Enter/Cancel/Marker
Marker 1
00 27 54
Marker 2 01
16 25
Marker 3 02 08 31
/Enter/Cancel/Marker
Marker 1
00 27 54
Marker 2
01 16 25
Marker 3 02 08 31
/Enter/Cancel/Marker
39