Auto Clock Setting - Panasonic PV-D744S Operating Instructions Manual

Auto clock setting

The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone
and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal.
NOTES:
• If the unit does not operate
properly, or No key operation (by
the unit and/or the remote control):
Static electricity, etc., may affect the
player's operation. Disconnect the AC
power cord once, then connect it
again.
• Both the VCR and the DVD have their
own menu option (See page 35).
• If no buttons are pressed for more
than 60 seconds, the MENU screen
will return to normal TV-operation
automatically.
• When shipped from factory, the "Time
Zone" option is set to "AUTO" position.
• After Auto Clock setting, in some case
the clock may display the other time
zone's. You can correct the clock by
selecting your Time Zone setting
above.
• When the clock is not set or you set
the clock manually, Time Zone setting
is not available.
18
Preparation:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
Auto clock setting
WAIT 30 MINUTES!
connections of the antenna and the power plug. Because the Auto
Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the DVD/VCR after the Auto Clock operation
completed.
•
When shipped from factory, the "Auto Clock" option is set to "ON" position.
•
If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.
•
With cable box connection, if the Auto Clock Setting is unsuccessful,
please select the PBS channel carrying the XDS information, then
turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and
if the clock is not set automatically, set the clock manually. (See page 20)
Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may recognize
the wrong station for the Auto Clock set. To correct the situation:
Preparation:
• Turn ON the TV and set to the video input mode.
• Press VCR/DVD to select the VCR mode. (The VCR indicator will
light.)
1
Press VCR MENU. The VCR menu screen will appear.
Press SET + or – to select the "SYSTEM SETUP" menu, then
press ENTER.
2
Press SET + or – to select the
"STANDARD TIME" option, then
press ENTER.
3
Press SET + or – to select your Time Zone, then press the ENTER.
ATLANTIC : GMT – 4 hours
(GMT: Greenwich Mean Time)
EASTERN : GMT – 5 hours
CENTRAL : GMT – 6 hours
MOUNTAIN : GMT – 7 hours
PACIFIC : GMT – 8 hours
ALASKA : GMT – 9 hours
HAWAII : GMT – 10 hours
AUTO : AUTO SET
4
Press VCR MENU until the MENU screen is cleared.
when the power switch is off, after the
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
WEAK SIGNAL DISPLAY
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
á
STANDARD TIME
ATLANTIC
CENTRAL
PACIFIC
HAWAII
AUTO
+/-/ENTER/MENU
á
ON OFF
ON OFF
ñ
EASTERN
MOUNTAIN
ALASKA
ñ