Clock Setting - Panasonic NV-VP30EB Operating Instructions Manual

Clock setting

On Screen Display.
Menu
Timer recording
Tuning
Clock set
Others
:select : access
ENTER
: exit
EXIT
Datum / Zeit Clock set
MANUAL
Time : 12 : 00 : 00
Date : 11. 6. 03
Datum / Zeit Clock set
AUTO
Time : 12 : 00 : 00
Date : 11. 6. 03
TV
VCR DVD The clock will normally be set correctly during Auto-Setup however, in some
circumstances the VCR cannot set the clock automatically. In this case, follow
the operation steps below to manually set the clock.
To manually adjust the clock
!
Press MENU
!
Press ENTER
!
Confirm that Clock set is set to MANUAL, and press
!
Use or
!
Press ENTER
!
Press EXIT
To activate the automatic time correction function
The correct time for the VCR clock can be automatically maintained when the
VCR is tuned to a station that transmits a time signal.
!
Press MENU
!
Press ENTER
!
Use to set AUTO.
!
Press ENTER
Under adverse reception conditions, etc., the Automatic time correction
function may not work. In this case, the indication for Clock setting is
automatically reset to MANUAL. If the reception conditions improve later on, it
may be possible to activate this function.
!
Press EXIT
-
Notes:
If Clock setting is set to AUTO when you open the Clock screen, do not set it to
MANUAL, otherwise, the automatic time correction function is deactivated.
-
This VCR uses a 24 hour clock.
-
In case of a power failure, an automatic back-up system maintains the clock for
approximate 60 minutes.
-
When Clock setting is set to AUTO, the automatic time correction function checks and if
necessary adjusts the time several times every day. The automatic time correction
function only works when the VCR is in standby, it does not work in the timer recording mode.
and select Clock set
.
Numeric buttons to set the Date and Time.
to conclude the settings.
to exit the On Screen Display.
and select Clock set
.
to conclude the setting.
to exit the On Screen Display.
VCR
.
ENTER .
.
DVD
35