Still (Pause) Picture; Frame By Frame Picture; Dvd/Video Cd - Panasonic PV-DF2702 Operating Instructions Manual

* Important: I f a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
I
Forward/Reverse rapid scene
search
➔ Press FF/SLOW+ or REW/SLOW-
during play.
➔ Press PLAY to release.
• Starting forward/reverse search during play
started from menu on Video CDs may recall
menu.
• Search speed, slow at first, increases with
each additional press of the button up to 5
levels.
I Forward/Reverse Chapter/Track
Skip
➔ Press SKIP
Each press skips a chapter (DVD) or
track (Video CD/CD).
|
Pressing SKIP once midway through a
chapter/track returns to start of that chapter/track.
Each additional press skips back one chapter/
track.
• Pressing SKIP
from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track
Reverse Skip
I Still (Pause) Picture
➔ Press STILL/PAUSE during play.
➔ Press PLAY to release.
• DVD/Video CD : The unit will enter Still picture mode.
• CD : The unit will enter Pause mode.
I Frame by Frame picture

(DVD/Video CD)

➔ Press STILL/PAUSE in Still mode.
➔ Press PLAY to release.
• Each press advances picture one frame.
• Hold down for consecutive frame advance.
• Whether pictures are advanced by "FRAME" or
"FIELD" is selected automatically (see page 61).
I Slow Motion picture (DVD/Video CD)
➔ Press FF/SLOW+ or REW/SLOW-
(DVD only) in Still mode.
➔ Press PLAY to release.
• Slow motion speed, slow at first, is increased
with each additional press of the button up to 5
levels.
• Reverse slow motion is not available for video
CDs.
| or | during play.
| |
or during play started
Chapter/Track Chapter/Track
Forward Skip
• When appears on the screen while a button
is being operated, it means that the
corresponding operation is prohibited by the
unit or the disc.
RESUME function
The unit memorizes the point where STOP
is pressed ( flashes on screen).
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
canceled when power is turned off and on.
• RESUME works only with discs for which
elapsed play time is displayed during play.
Auto-Power Off function
Power turns off after unit has been in Stop
mode (DVD) for about 5 minutes.
Enjoy Video CDs featuring
playback control without
using menus (Video CDs only)
1. Do steps 1-4 (previous page).
When menu appears, press STOP.
2. Press number key(s) to select desired
track (play begins).
• Check disc for track numbers.
• Press "1" to start at beginning of disc.
To Resume Menu use,
Press STOP, and press PLAY
screen will be displayed.
Now, go to step 5 (previous page).
Notes
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside down,
"PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON
DISC" is displayed.
• Remove disc and press unit POWER off when
not in use.
• Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.
, the menu
21