Angle Indicator - Panasonic PV-DF2702 Operating Instructions Manual

* Important: If a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
When appears on the screen
while a button is being operated,
it means that the corresponding
operation is prohibited by the unit
or the disc.

ANGLE Indicator

Notes
• ANGLE Indicator lights up on the unit
when a scene recorded at different
angles is detected.
• The angle number can be set
beforehand so that the angle is
switched whenever ANGLE Indicator
lights up.
Notes
• Closed captioning will not be
displayed while Picture Zoom is
used. To see subtitles, set the
subtitle feature to ON (see pag
• The subtitle cannot be enlarged nor
can it's position be changed.
• The picture zoom feature does not
work with a Video CD.
• During picture zoom, "ZOOM1" or
"ZOOM2" is displayed on-screen.
• Zooming, on some discs, may result
in poor picture quality, or not operate.
DVDs may contain scenes shot from multiple camera
angles allowing the same scene to be viewed at
different angles. You can view these angles,
if available, using the ANGLE button.
ANGLE : 1
SELECT :
ANGLE : 2
SELECT :
Number of angle being played back.
Vocal selection for Karaoke discs (DVD/Video CD)
Press AUDIO in Play mode to display the
audio screen.
AUDIO:2 ENG VOCAL ON
SELECT :
• DVD Karaoke (1 vocal) VOCAL ON
• DVD Karaoke (2 vocals) VOCAL V1 + V2 VOCAL V1 VOCAL V2 VOCAL OFF
• Video CD
You can enlarge specific portions of a picture and select
the zoom ratio using the ZOOM button on the remote
during DVD playback.
Set Zoom size.
Press ZOOM repeatedly to change display as follows.
• You can enlarge the center portion of the image to one of 2
magnifications.
e 48
X 1.0 (ORIGINAL)
).
Hello!
Use the ,
down, left and right.
Press ANGLE in Play
mode to display the angle
selection on-screen.
• Display disappears after 5
seconds.
SET : SET
Press
desired angle.
SET : SET
1) Press
select as shown below.
2) Press
(DVD only)
SET : SET
VOCAL OFF
LR L R
X 1.5 (ZOOM 1)
1st press 2nd press
Hello!
ZOOM 1
, and buttons to move the position up,
to select the
(or ) to
(or ) to set.
X 2.0 (ZOOM 2)
Hello!
ZOOM 2 ZOOM 2
3rd press
49