Audio Connections - Panasonic PV-DF2702 Operating Instructions Manual

Connections (continued)

Audio connections

Unit ➔ Amplifier ➔ Speaker
I
Unit
AUDIO OUT
R
R
AUDIO IN
Speaker
Manufactured under license from Dolby
Laboratories. "Dolby", and the double-D
symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. © 1992-1997
Dolby Laboratories, Inc. All rights reserved.
12
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
L
Amplifier
L
Speaker
Ready Checklist
Turn down the volume, then turn this unit, as well as
other equipment to be connected, off before
proceeding with connection.
Do not block ventilation holes of any of the
equipment and arrange them so that air can
circulate freely.
Read through the instructions before connecting
other equipment.
Ensure that you observe the color coding when
connecting audio and video cables.
Enjoying digital audio output from the
digital audio output connector
Notes on audio output from the optical digital
audio output connector
Sound
Disc
recording
format
Dolby Digital
DVD Linear PCM
(48/96 kHz
16/20/24 bit)
dts
Video
MPEG 1
CD
CD
Linear PCM
*1 The type of audio output from the connector can be
selected by the Settings for DVD Operation. (See
page 60.)
*2 Sound having 96 kHz sampling is converted into 48
kHz sampling when it is output from the unit's optical
digital audio output connector.
For your reference:
• Dolby Digital is a digital sound compression technique
developed by the Dolby Laboratories Licensing
Corporation. Supporting 5.1-channel surround sound,
as well as stereo (2-channel) sound, this technique
enables a large quantity of sound data to be efficiently
recorded on a disc.
• Linear PCM is a signal recording format used in CDs.
While CDs are recorded in 44.1 kHz/16 bit, DVDs are
recorded in 48 kHz/16 bit up to 96 kHz/24 bit.
• If you have a Dolby Pro Logic Surround decoder, you
will obtain the full benefit of Pro Logic from the same
DVD movies that provide full 5.1 channel Dolby Digital
soundtracks, as well as from titles with the Dolby
Surround mark. For information on Panasonic or
Technics Dolby Pro Logic Surround Sound Decoders
please contact your local dealer.
Optical digital audio
output from connector
Dolby Digital bitstream
(1-5.1 ch) or OFF (no
1
output)*
Linear PCM (2ch)
(48 kHz sampling/16 bit
only)* 2 or no output* 1
Bitstream or no output*
PCM
(44.1 kHz sampling)
Linear PCM
(44.1 kHz sampling)
1