Panasonic PV-DF2702 Operating Instructions Manual page 37

* Important: If a remote control button does not work when pressed, press the
and try the button again.
Auto Operation Functions
I Auto Shut Off
No broadcast signal in TV mode (Only when
Weak Signal Display is set to OFF.), DVD stop,
or blank tape is played for 5 minutes
➔ Power turns off
• This feature is canceled if any button is
pressed during above conditions.
I Auto Playback
Insert a tape in Power off mode
➔ Power turns on
• Playback begins if tape has no record tab.
I
Auto Rewind (except for Recording)
Tape reaches its end
➔ Rewind, ➔ Stop
I Playback Auto Eject
Tape with no record tab reaches its end
➔ Rewind, ➔ Stop, ➔ Eject
Commercial Skip
By pressing the CM/ZERO button in Playback mode
you can skip over 1 to 3 minutes of recorded tape in
just a few seconds.
Press CM/ZERO repeatedly to select skip
time in Playback mode.
• No indication appears.
button on the remote
(Repeat Play is "OFF")
37