Panasonic PV-DF2702 Operating Instructions Manual page 13

I
Unit ➔ Decoder with Dolby Digital ➔ Amplifier ➔ Speaker
When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream
is output from the unit Optical digital audio output connector. When the unit is connected to a
Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home.
[An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or
dts decoder is used.]
Notes on connecting an Optical
digital audio cable (optional)
• Firmly connect the cable to
the connector
Caution for optical digital audio
output connector:
• When connecting an amplifier (with
an Optical digital input connector)
which does not contain the Dolby
Digital or dts decoder, be sure to
select "OFF" at "Dolby Digital" and
"OFF" at "dts" of the Settings for
DVD Operation "AUDIO OUTPUT"
(see page 58). Otherwise, any
attempt to play DVDs may cause
such a high level of noise that it may
be harmful to your ears and damage
your speakers.
• When a dts decoder is connected,
please select "Bitstream" at "dts" of
the Settings for DVD Operation
"AUDIO OUTPUT". If "OFF" is
selected, there will be no sound.
(See page 58).
• Video CDs and CDs can be played
as normal.
Note:
• Some dts decoders which do not
support DVD-dts interface may not
work properly with the unit.
or
dts
(digital theater systems)
Unit
Optical digital audio
cable (optional)
Amplifier
Decorder with Dolby Digital/
dts processing (optional)
Front
Speaker
Subwoofer
Surround
speaker
Center speaker
Front
Speaker
Surround
speaker
13