Mp3 Playback Operation - Panasonic PV-DF2702 Operating Instructions Manual

MP3 Playback Operation

MP3 Playback
You can use this unit to play MP3 format audio recorded for
personal use with a computer etc. onto a CD-R or CD-RW.
Play may not be possible in some cases due to the
condition of the recording.
1
Press POWER on the remote or DECK.
2
Press OPEN/CLOSE,
and then place a MP3 disc into the disc tray.
Press OPEN/CLOSE to close.
3 Display MP3 MENU and start playing
automatically. (The MP3 CD layer is displayed.)
Function
Status
PLAY
ROOT
VA VA
Folder area
TECHNO
POPS
(The currently
JAZZ
displayed folder
turn green)
PLAY MODE : NORMAL
<Example>
PLAY MODE
ROOT
VA
END_WALTZ
DD_CUB I C
NOCTURNE
NORN
TECHNO
POPS
(The disc layer composition of the
sample OSD above is displayed.)
JAZZ
Forward/Reverse Search
Press FF/SLOW+ or RR/SLOW- during play.
Press PLAY to release.
• Search speed, slow at first, increases with each
additional press of the button up to 4 levels.
Forward/Reverse Track Skip
Press SKIP | or |
Each press skips a track.
• If pressed within first 3 seconds of playback, skips
to the previous track. If over 3 seconds, returns to
first of that track. (|
• Only the SKIP | or |
for track skip selection during playback.
Place unit into Stop mode before performing folder/
file selection (see above right.)
4
Press STOP to stop playing.
5
Press OPEN/CLOSE to eject the disc.
The MP3 MENU is closed automatically.
52
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Counter
<Example>
Parent
folder
00 : 00 : 00
MP3 MENU
. .
END_WALTZ
DD_CUB I C
NOCTURNE
NORN
File area
(The selected
MP3 file/folder
is displayed
with a cursor.)
: MP3 file
: Folder
: Parent folder
SKIP during play.
SKIP only.)
SKIP button can be used
*Important: If a remote control button does not work
when pressed, press the DVD button on
the remote and try the button again.
MP3 playback (During STOP mode)
1) Press to select an MP3 file (
2) Press SET or PLAY to start playback.
Select folder (During STOP mode)
1) Press to select a folder (
2) Press SET displays files/folders
contained in the folder.
Select parent folder (During STOP
mode)
1) Press to select a folder (
2) Press SET changes to the
previous layer display.
Note
• Folder area operation cannot be done.
Only file area operation is possible.
Select PLAY MODE (During STOP
mode)
1) Press moves the cursor to
PLAY MODE.
2) Press to select the desired
PLAY MODE (see below).
[PLAY MODE]
NORMAL:
All MP3 files are selected and
played back one time only.
SINGLE REPEAT:
The selected MP3 file is
played back repeatedly.
FOLDER REPEAT:
The MP3 files contained in
the selected folder are played
back repeatedly.
However, folders below the
selected folder are not played
back.
DISC REPEAT:
All MP3 files are played back
repeatedly.
.
)
).
).