Copy Your Tapes (Dubbing) - Panasonic PV-DF2702 Operating Instructions Manual

Copy Your Tapes (Dubbing)

Connections you'll need to make
Playing (Source) VCR
R-AUDIO-L
OUT
IN
Playback (Source)
1
2
3
(Perform operation of steps 4 and 5 on both units at same time.)
4
5
STOP
Caution
• Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
VIDEO
MONO
Insert pre-
recorded tape.
Press PLAY then
PAUSE at starting
o put in
point t
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
* Important: If a remote control button does not work
when pressed, press the
the remote and try the button again.
Recording (Editing) unit
IN FROM
ANT.
VIDEO IN
OUT TO
TV
Recording (Editing) unit
Insert blank tape
with record tab.
• Dubbing tapes protected
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then
Press STILL/PAUSE
immediately
Standby mode.
Press STILL/PAUSE
to start dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press SET
for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press SET to select "TUNER," "LINE 1" or "LINE 2."
d Press ACTION twice to exit this mode.
button on
L-AUDIO IN-R
with Copy Guard will have
poor quality results.
to put in
LINE 2 1 2 3
(CABLE)
(TV)
LINE 1 125 or 69
19