Swivel Castor Bearing; Swivel Castors - Husqvarna PT26D Workshop Manual

Swivel castor bearing

1. Remove the screw (9) and washer (8).
2. Remove the fork (7).
3. Replace the bushings (5) if necessary.
4. Assemble in reverse order.
Tightening torque according to the table.
5. Lubricate with lubricant spray and check
that grease penetrates to the upper and
lower bearing.

Swivel castors

1. Remove the screw (12+13) and remove
the wheel.
2. Move the spacing pipe (11) to the new
wheel.
3. Assemble in reverse order. Tightening
torque according to the table.
4. Lubricate with lubricant spray and check
that grease penetrates to both sides.
98
English-
REPAIR INSTRUCTIONS
17
20
9
8
5
14
4
5
12
10
Swivel castors with bearing
2
16
6
18
19
14
7
13
11
8043-204