Delivery Procedures - Husqvarna PT26D Workshop Manual

DELIVERY AND DEALER SERVICE

Delivery Procedures

To our dealers
A well performed pre delivery service is the first
step towards an active after-sales market.
An active after-sales market benefits everyone:
• The customer will be satisfied with their
machine. They know where to turn in order to
get help if problems arise.
• You gain a regular customer, who recom-
mends you and your company to other pro-
spective customers.
• In this way, together we build our brand, and
assume joint responsibility for our products
and our customers.
Be thorough with the paper work.
Fill in the guarantee and delivery documents etc.
and ensure that the customer gets the right opera-
tor's manual for their machine.
Organise a customer register so that in the future,
you can see which machine the customer owns,
as well as the appropriate serial numbers. The reg-
ister is of benefit when you order spare parts and
during future marketing activities.
1. Fitting the cutting unit
See instructions under "Repair instructions \
Cutting unit with suspension".
2. Adjustment of the cutting unit
See instructions under "Repair instructions \
Setting the cutting height and tilt angle".
3. Check the coolant level, antifreeze
Only use a glycol based antifreeze that is
approved in accordance with the applicable norms
BS 6580:1992 or ASTMD 3306-89 or AS 2108-
1977 (indicated on the packaging).
The antifreeze agent must be intended for use with
light alloy engines.
The antifreeze agent contains additives that pro-
tect the engine cooling system against corrosion.
22
English-
In conjunction with the delivery, you shall also give
the customer the information required to handle
and maintain their machine in a safe manner.
Remember in particular to inform the customer
about:
• Safety regulations.
• Manoeuvre controls.
• Checking oil levels. Topping up oil and the
type of oil required.
• First oil change after the running in period.
• The need and benefit of following the service
schedule and leaving the machine for regular
service.
• Which fuel is to be used.
• Mowing tips to attain good results. Application
areas for mulching.
• The accessories available for the customer's
type of machine.
• Guarantee rules.
• Your company and whom the customer
should approach if problems arise.
IMPORTANT INFORMATION
If you use the incorrect type or mix
different types of antifreeze agents, a
chemical reaction may occur, which
causes overheating and severe engine
damage. These are not covered by the
warranty.
Glycol Water
60 % 40 %
50 % 50 %
40 % 60 %
Freezing
point
- 47 °C
- 37 °C
- 25 °C