Delivery and service
2.1 Service schedule
Descriptions of the maintenance below are found in the operator's manual.
Care
General inspection.
Clean.
Make sure that the start inhibitor works.
Make sure that the safety devices on the product are
undamaged.
Check the cutting equipment.
Make sure that the cutting cover is not damaged and that
there are no visible defects such as cracks.
Do a check of the motor brake handle. Release the motor
brake handle and make sure that the motor stops.
Make sure that the ON/OFF button works and is not defective
(LC 141Li and LC 141VLi).
Make sure that the battery is intact (LC 141Li and
LC 141VLi).
Check the battery charging status (LC 141Li and LC 141VLi).
Make sure that the release button on the battery works and
locks the battery into the product (LC 141Li and LC 141VLi).
Make sure that the battery charger is intact and functional
(LC 141Li and LC 141VLi).
Check the connections between the battery and the product
and also check the connection between battery and the
battery charger (LC 141Li and LC 141VLi).
6 – English
2 Delivery and service
Chapter
Daily mainte-
Weekly
nance before
maintenance
after
X
X
X
X
X
X
X
X
X
X
X
X
Monthly
maintenance
X