To Do A Test Of The Save Function; Speed Control (Lc 141 Vli) - Husqvarna LC 141VLi Workshop Manual

3. Press the ON/OFF button (1). Make sure that the
green LED (2) comes on.
4. Push the motor brake handle down and make sure
that the start inhibitor prevents start of the motor.
5. Loosen the start inhibitor.
6. Push the motor brake handle down. Make sure that
the blade starts to rotate.
7. Release the motor brake handle and make sure that
the blade stops.
8. Press the ON/OFF button (1). Make sure that the
green LED (2) goes off.

2.3.2 To do a test of the SavE function

1. Do steps 1-6 under "2.3.1 To start and stop the
motor".
2. Press the SavE button (1). The LED (2) comes on
and you can hear that the rpm of the blade lowers.
3. Press the SavE button again.
4. The LED goes off and the rpm of the blade rises.

2.3.3 Speed control (LC 141 VLi)

1. Do steps 1-3 under "2.3.1 To start and stop the
motor".
2. Pull the propulsion bar in the direction of the handle
to start the drive.
3. Press the + and - next to the symbols for fast and
slow.
4. Make sure that the speed increases when you press
+ and decreases when you press -.
5. Make sure that 1 speed indicator light comes on for
each increase of the speed.
6. Make sure that 1 speed indicator light goes off for
each decrease of the speed.
Delivery and service
English – 9