Single Camera Installlation - Bosch MIC Series Tech Note

6/18 | Configuration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV
3.2 Single-camera installation
Single-camera installations occur when the camera is installed with a direct connection (such as on a
mobile application) and is locally controlled and viewed using an analog monitor and a joystick. In the
case that a local DVR is installed for recording video, the analog video signal is directly interfaced to a
DVR for local recording.
The diagram below explains the integration between various components:
Figure 1: MIC IP 7000 HD direct decoder connection with no local recording.
Figure 2: MIC IP 7000 HD direct decoder connection with local recording in DVR.
For SW configuration and details about interface ports, please see Section 4.0.
Version 1.3 | September 2015 Bosch Security Systems