Table of Contents
Advertisement
14/18 | Configuration of MIC IP 7000 HD – VIDEOJET decoder 3000 – for integration with analog CCTV
2.
Under SETTINGS in the Decoder Profile panel, set the standard to NTSC/PAL (depending on
the regional TV format). If desired, checkboxes are available to force the standard or to crop
the video. Click the Set button.
Figure 11: Decoder Profile configuration.
3.
In the Interfaces -> COM1 menu, select the settings featured in the image below. Click the
Set button.
Figure 12: COM1 port configuration menu.
Version 1.3 | September 2015
Bosch Security Systems
Advertisement
Table of Contents
