Set Up The Mobile Hotspot Using The Touch Screen; Use A Web Browser To Set Up The Mobile Hotspot - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

Set Up the Mobile Hotspot Using the Touch Screen

The first time you start the mobile hotspot, you can set the admin password, and change
the WiFi name and WiFi password, using the Touch Screen.
1. Press and hold the Power button for 3 seconds.
To better safeguard your network, the first time you turn on your mobile hotspot,
you are asked to set up your login credentials.
2. Follow the onscreen instructions to custoize your settings.
You can change settings such as the WiFi password, WiFi Manager login password,
and WiFi standby time. The default WiFi Manager admin login password is attadmin.
The default WiFi password is on the label inside the battery compartment.

Use a Web Browser to Set Up the Mobile Hotspot

To set up the mobile router:
1. Connect your computer to the mobile hotspot WiFi network.
To view the mobile hotspot WiFi network name, tap the Power button to wake up
the LCD.
Note: You can also use a tethered connection to access the mobile hotspot from a
computer. For information about how to do this, see Tethered Connection on page
18.
2. Launch a web browser.
3. Enter http://attwifimanager or http://192.168.1.1.
You are prompted to change the password for the admin user name and to change
the WiFi name and WiFi password.
Note: The default password for the admin user name is admin. We strongly
recommend that you change this password to a more secure password.
4. Follow the onscreen instructions to set up your mobile router.
Get Started
Nighthawk 5G Mobile Hotspot Pro
14 User Manual