Tethered Connection; Use The Touch Screen To Access The Mobile Hotspot; Use The Netgear Mobile App To Access The Mobile Hotspot - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

Tethered Connection

To connect the mobile hotspot to the USB port on your computer:
Attach one end of the USB (type C) cable to the mobile hotspot and plug the other
end into the USB port on your computer.
Your computer automatically connects to the mobile hotspot LAN (local area network).
The first time you connect this way, your computer might display notifications about
detecting a new device.
Note: If you want to use data offloading with a tethered USB connection, use WiFi
offloading instead of Ethernet offloading. Tethered USB access is not supported
during Ethernet offloading. For more information about offloading, see Offload Your
Mobile Internet Connection on page 31.
Use the Touch Screen to Access the Mobile
Hotspot
The first time you start the mobile hotspot, you can set the admin password using the
Touch Screen or access the mobile hotspot directly.
Use the NETGEAR Mobile App to Access the
Mobile Hotspot
You use the NETGEAR Mobile app to set up the mobile hotspot. After initial setup, you
can launch the app again and use it to log in to the mobile hotspot to view or change
its settings.
Connect to the Mobile Hotspot
Nighthawk 5G Mobile Hotspot Pro
18 User Manual