View The Connected Devices From A Web Browser; Update The Mobile Hotspot Firmware; Update Firmware From The Touch Screen; Update Firmware From An Alert - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

The dashboard displays.
4. Tap Connected Devices.
A list of connected devices displays.

View the Connected Devices From a Web Browser

To view the connected devices from the mobile hotspot web page:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
A list of devices connected to the WiFi network displays on the dashboard.
If you notice a WiFi device that you do not recognize, you can block that device from
connecting to your WiFi network.

Update the Mobile Hotspot Firmware

The mobile hotspot automatically checks for new firmware updates. If an update becomes
available, the mobile hotspot displays an alert. You can also check for updates manually
without receiving an alert.

Update Firmware From the Touch Screen

The mobile hotspot software can check for updates from the Touch Screen.
You can check for firmware updates from the Touch Screen. To do this, select
Software>Check for updates now.

Update Firmware From an Alert

To update the firmware:
1. Open the alert.
2. Click the Download button.
When the download completes, the mobile hotspot displays an alert with an Install
now button.
Manage Your Mobile Hotspot
Network
Nighthawk 5G Mobile Hotspot Pro
65 User Manual