Recharge The Battery From A Computer Usb Port; Use The Usb Type C Cable To Charge Only - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

Recharge the Battery From a Computer USB Port

To recharge the battery from the USB port on your computer:
Attach one end of the micro USB cable to the mobile hotspot and plug the other
end into the USB port on your computer.
The Battery icon on the LCD indicates that the battery is charging.
Note: The LCD goes into sleep mode after a set time to extend battery life. To wake
up the LCD, tap the Power button.

Use the USB Type C Cable to Charge Only

You can log in to the mobile hotspot and specify a setting so that the USB type C cable
is used only for charging and not to access the mobile hotspot using a web browser.
You might want to do this if you are using the Ethernet port and a wall socket is not
available to charge the mobile hotspot.
To specify a USB type C cable charge-only setting:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://attwifimanager or http://192.168.1.1.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The mobile hotspot dashboard displays.
4. Select Setup > Router Setup.
The Router Setup page displays.
Manage Battery Usage and
Charging
Nighthawk 5G Mobile Hotspot Pro
25 User Manual