Enable Dmz - NETGEAR Nighthawk 5G Mobile Hotspot Pro User Manual

Enable DMZ

In a demilitarized zone (DMZ) network configuration, a computer runs outside the firewall
in the DMZ. This computer intercepts incoming Internet traffic, providing an extra layer
of protection for the rest of the network, and sending all incoming data to a particular
IP address.
To enable the DMZ and designate a computer to screen incoming traffic:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://attwifimanager or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Advanced Settings> Other.
The Other page displays.
5. Select the Enable check box.
6. In the DMZ Address field, enter the IP address of the computer to which you want
all data sent.
If the mobile hotspot is tethered using a USB cable, this address is 192.168.1.4. If
the mobile hotspot is connected using WiFi, the first WiFi client's IP address is usually
192.168.1.74.
7. Click the Apply button.
Your settings are saved.
Control Internet Access
Nighthawk 5G Mobile Hotspot Pro
48 User Manual