Porsche 911 GT3 Cup MR Gen. II Technical Manual page 40

Only original valves with part number 9F2601361 may be used.
NOTE
Tire pressure sensors should be replaced after two years. Do not block
NOTE
the openings of the pressure sensor with the tire mounting paste. This
can impair the function of the pressure sensor.
Check the tightening torque of the valve nut before each use. Do not
tighten a loose valve again! The valve must be replaced.
Version V2, 08/2020 Porsche 911 GT3 Cup MR Gen.II
SUSPENSION | Rims
40
Home