Maintenance
There are no user-replaceable parts inside the Tester.
To prevent a possible electrical shock or personal injury:
•
Do not repair or service the Product beyond what is described in this manual.
•
Have an approved technician repair the Product.
Cleaning
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents to clean
the Tester.
Battery Replacement
To replace the batteries:
1.
Turn off the Product and remove all test leads.
2.
Turn the two battery-door latches until the unlock symbol () aligns with the slot. See Figure 2.
3.
Lift off the battery door.
4.
Remove the AA batteries and replace with new batteries. Use the correct battery orientation.
5.
Install the battery door.
6.
Turn the battery-door latch until the slot is vertical to the unlock symbol ().
XW Warning
Figure 2. Battery Replacement
Insulation Tester
Maintenance
21