JUKI MO-80CB Instruction Manual page 6

17. If oil gets in eyes, immediately, rinse the oil out with water. If you swallow oil by
mistake, immediately consult a medical doctor.
18. To reduce risk of injury, switch off before servicing. Close looper cover before
operating.
"SAVE THESE INSTRUCTIONS"
"This overlock sewing machine is intended for household use only."
* Keep the instructions at a suitable place close to the machine and hand it over if
you give the machine to a third
* Use the machine only in dry locations.
* Never leave the machine unattended with children or elderly people due to they
may not be able to estimate the
* Don't let children play with the machine.
* This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental
unless they have been given supervision or instruction
appliance by a person responsible for their safety.
* Children should be supervised to ensure that they do not play with the appliance.
* Always unplug the machine if you leave it unattended, to avoid injury by
expediently switch on the machine.
* Always unplug the machine if you carry out maintenance (oiling, cleaning).
* Don't use the machine if it's wet or in humid environment.
* Never pull at the cord, always unplug the machine by gripping the plug.
* Never place anything on the pedal.
* Never use the machine if the air vents are blocked keep the air vents of the
machine and the foot pedal free from dust, fusel and leftovers.
* The machine may only be used with foot pedal
4C-316B for USA and Canada, 4C-316C/
* If the supply cord connected with foot pedal is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person, in order to avoid a
hazard.
"SERVICING DOUBLE-INSULATED PRODUCTS
(Except USA / Canada)"
In a double-insulated product, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated product nor
should a means for grounding be added to the product. Servicing a double-insulated
product requires extreme care and knowledge of the system and should only be
done by qualified service personnel. Replacement parts for a double-insulated
product must be identical to those parts in the product. A double-insulated product
is marked with the words DOUBLE INSULATION or DOUBLE INSULATED.
The symbol may also be marked on the product.
party.
risk.
capabilities, or lack of experience and knowledge,
4C-326G/
5
concerning use of the
manufactured by Wakaho.
4C-345G for other countries.
Type