Critical Section (From 8C00H); Scsi Module (From 9400H) - HP LTO Ultrium Technical Reference Manual

Critical section (from 8C00h)

Error
8C00h
8C01h

SCSI module (from 9400h)

Error
9401h
9402h
9403h
9404h
9405h
9406h
9407h
9408h
9409h
940Ah
940Bh
940Ch
940Dh
940Eh
940Fh
9410h
9412h
9413h
9414h
9415h
9416h
9417h
136 Drive error codes
Description
End section not begun. CRSEndCritIntSect was ended without CRSBegIntSect.
Begin section ints off. CRSBegCritIntSect found ints already off.
Description
Power-on reset Unit Attention.
Firmware reboot after upgrade Unit Attention.
SCSI bus reset Unit Attention.
BDR reset Unit Attention.
Soft reset Unit Attention.
Transceivers changed to SE Unit Attention.
Transceivers changed to LVD Unit Attention.
Nexus lost Unit Attention.
Media changed Unit Attention.
Mode parameters changed Unit Attention.
Log values changed Unit Attention.
Unsupported task management function.
LUN has too many task objects.
Unsupported LUN.
Invalid field in CDB.
Unsupported opcode.
Unsupported command handler request.
Unavailable opcode.
Not a fast ACI command.
Response pending.
Aborted.
Reserved.