HP LTO Ultrium Technical Reference Manual page 86

Code Description
1862h A field is invalid in a diagnostic CDB command.
1863h POST failed. The image checksum is invalid.
1864h POST failed. The checksum is incomplete.
1865h Invalid length/address in READ/WRITE MEMORY command.
The Drive Configuration Table returned permission denied in response to a Write CM/EEP-
1866h
ROM operation.
1867h Verify root key failed as no root key found in OTP.
1868h Root key is incorrect.
1869h Drive unexpectedly in unsecured state.
186Ah RSA public key not found.
186Bh RSA private key not found.
186Ch RSA key pair not found.
186Dh Data following encryption/decryption with RSA key is incorrect.
186Eh Root key generated when one already exists.
186Fh Drive in unexpected security state.
1870h RSA key storage was attempted when one already exists.
1871h OTP public key already exists.
1872h OTP public key not found.
1873h Management ARM testid is not supported.
1874h Unable to obtain Humidity value.
1875h Unable to obtain Humidity value.
1876h Unable to perform OTP write.
1877h Unable to perform OTP read.
1878h Unable to perform OTP write, write-protect set.
1879h Unable to perform OTP write; the bank has been previously written to.
187Ah OTP write has taken too long.
187Bh OTP STATUS_RDY not set when expected.
187Ch OTP STATUS_RDY not set for bank re-read following write.
187Dh POST failed OTP security state in debug mode.
187Eh Checking OTP banks blank, parameters out of bounds.
86 Drive error codes