HP LTO Ultrium Technical Reference Manual page 144

Error Description
The ADT Port interface received a SCSI operation from a device server with an invalid Context
9810h
ID.
9811h Unable to generate a frame because it exceeds the maximum payload size.
9812h The ADT Port interface received more SCSI data than is permitted within a burst.
9813h The ADI Port interface has received a Data IU with an offset outside the current burst.
9814h The ADT Port interface received a command from a device server that it cannot support.
9815h The ADT Port did not receive an ACK for a frame it transmitted.
9816h Temp need to replace with SI_ERR_TASK_QUEUE_FULL when available.
9817h Self-test failed: Unexpected FCBs allocated.
9818h Self-test failed: Unexpected exchange open.
9819h Self-test failed: Queue not empty.
981Ah Self-test failed: SCSI Exchange not in the state IDLE.
981Bh The ADT port has detected an excessive number of framing errors.
981Ch Self-test failed: Non-zero library ACK offset.
981Dh Received Transfer Ready IU contained an invalid Buffer Offset field.
981Eh Received an ACK frame but not for frame it was expecting.
981Fh Received an NAK frame but not for frame it was expecting.
9820h Giving up initiating a Port Login after a number of failed attempts.
9821h Discarding an ACK frame it received after the acknowledgement timeout.
9822h Did not receive acknowledgement within the Acknowledgement Period.
9823h Received a frame with a checksum error.
9824h Received a frame when the port was disabled.
9825h Received Transfer Ready IU was shorter than expected.
9826h Received Transfer Ready IU was longer than expected.
9827h Received Transfer Ready IU contained a Burst Length value of zero.
9828h Failed to execute a SCSI operation because it is logged-out.
9829h Failed to execute a SCSI operation because it is busy doing something else.
982Ah Aborted bridged SCSI command due to a communication failure.
982Bh Unsupported task management function.
982Ch Invalid SCSI response code.
144 Drive error codes