Application Advice; Functional Description And Specifications - Dremel 670 Original Instructions Manual

k. Follow the dust-related national requirements for the materials you
want to work with.
l. Do not attempt to cut extremely small workpieces.
m. Remove all obstacles on top of as well as underneath the cutting
path before you start cutting.
n. Do not work overhead with the tool.
o. Always disconnect plug from power source before making any
adjustment or changing any accessory.
p. Use hearing protection
q. The replacement of the plug or the supply cord shall always
be carried out by the manufacturer of the tool or his service
organization.
a. Always face the good side of the workpiece down to ensure
minimum splintering.
b. Use only saw blades recommended by the manufacturer, which
conform to EN 847-1, if intended for wood and analogous materials.
DISPOSAL
The machine, accessories and packaging should be sorted for
environmental-friendly recycling.
ONLY FOR EC COUNTRIES
Do not dispose of power tools into household waste! According the
European Guideline 2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national right, power tools that
are no longer usable must be collected separately and disposed of in an
environmentally correct manner.

FUNCTIONAL DESCRIPTION AND SPECIFICATIONS

Figure A:
1 = Drive Adapter
.
2

APPLICATION ADVICE

ENVIRONMENT
5
11