Table of Contents
Advertisement
To turn on and shut down Pro-Stitcher
Check that the power cord is plugged into the power supply located at the back of the carriage. Then plug
in the barrel-shaped power connector to the bottom of the black box behind the computer and the short
power cord from the black box to the computer. If the cable is unplugged, the computer will continue to
run on battery power until the charge has been used up.
To turn on Pro-Stitcher
• Press the power switch, usually located on the side of the tablet computer.
To shut down Pro-Stitcher
• Choose the File Tab. Then choose the Shutdown button. Choose Shut Down from the drop down
menu. This shuts down both the Pro-Stitcher software and the tablet computer.
 IMPORTANT: If you don't see the Shut Down button, press the power switch on the tablet
computer to continue shutting down the Pro-Stitcher computer.
 IMPORTANT: If you leave the Pro-Stitcher computer powered on with the power cord unplugged,
the computer will begin running off battery power. The computer will shut down when no battery
power remains.
 IMPORTANT: If the Pro-Stitcher computer is left on for a long period of time, the screen may
turn black and enter a sleep mode. Tap the screen or press the Windows button below the screen
to turn on the screen again. It may be necessary to drag a finger upward on the start-up screen to
access Pro-Stitcher.
 IMPORTANT: Disable the auto-rotate feature for your tablet computer so that it only works in
landscape, or horizontal, mode. Depending on your computer, you will do this by pressing a button
on the top or side of the tablet computer or by using the Microsoft Windows Control Panel Display
options. Refer to the owner's manual that came with your tablet computer for more information.
www.Janome.com
Installation Instructions | 21
Hide quick links:
Advertisement
Table of Contents
