Weider WESY85100 User Manual page 12

21. Route the Short Cable (58) around the 3 1/2"
Pulley (15) attached to the lower hole in the
Front Upright (42). See the inset drawing.
Be sure that the Cable Trap (66) is turned
to hold the Cable in place and that the
Cable is routed around the Pulley as
shown. Tighten the 3/8" Nylon Locknut (21)
and the 3/8" x 3 3/4" Bolt (71).
22. Route the Short Cable (58) around the 3 1/2"
Pulley (15) attached to the upper hole in the
Press Frame (17). Be sure that the Cable
Trap (66) is turned to hold the Cable in
place and that the Cable is routed around
the Pulley as shown. Tighten the 3/8" Nylon
Locknut (21) and the 3/8" x 3 1/2" Bolt (not
shown).
23. Route the Short Cable (58) around the 3 1/2"
Pulley (15) attached to the upper hole in the
Front Upright (42). See the inset drawing.
Be sure that the Cable Trap (66) is turned
to hold the Cable in place and that the
Cable is routed around the Pulley as
shown. Tighten the 3/8" Nylon Locknut (21)
and the 3/8" x 3 3/4" Bolt (71).
21
42
15
21
22
23
58
15
42
21
12
42
15
71
66
58 58
Inset shows view
from other side
58
15
66
21
17
42
15
71
66
58
Inset shows view
from other side