Weider WESY29510 User Manual page 13

25. Wrap the Short Cable (42) around a 3 1/2" Pulley
(45). Attach the Pulley and a Cable Trap (44) to
the upper hole in the Press Frame (13) with a
3/8" x 3 1/2" Bolt (69), a 3/8" Washer (86), and a
3/8" Nylon Locknut (84). Be sure that the Cable
Trap is turned to hold the Cable in place and
that the Cable is routed around the Pulley as
shown.
26. Wrap the Short Cable (42) around a 3 1/2" Pulley
(45). Attach the Pulley and a Cable Trap (44) to
the upper hole in the Front Upright (4) with a 3/8"
x 3 3/4" Bolt (70), a 3/8" Washer (86), and a 3/8"
Nylon Jamnut (92). Be sure that the Cable Trap
is turned to hold the Cable in place and that
the Cable is routed around the Pulley as
shown.
27. Have a second person lift the Top Weight (24) off
the stack of Weights (22). Attach the end of the
Short Cable (42) to the Long "U"-Bracket (50)
with a 1/4" Nylon Locknut (82) and a 1/4" Washer
(81). See the inset drawing. Do not overtighten
the Nylon Locknut; it should be threaded onto
the end of the Cable so only two threads are
showing above the Nylon Locknut.
25
42
84
45
44
26
4
70
86
27
50
42
13
86
69
13
44
92
45
42
82
81
24
22
82
50
42