Part Identification Chart - Weider WEBE14010 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part from the Part List on page 10. Note: Some small parts may have been
pre-attached for shipping purposes. If a part is not in the parts bag, check to see if it has been pre-
attached.
M10 Washer (34, 35)
M8 Large Washer (41)
M8 Washer (39)
M10 Nylon Locknut (32, 33)
M6 x 16mm Screw (37)
M6 x 25mm Screw (48)
M4.2 x 20mm Self-tapping Screw (46)
M6 Nylon Locknut (47)
M8 Nylon Locknut (12)
M10 x 90mm Bolt (44)
M10 x 75mm Bolt (43)
M10 x 55mm Bolt (42)
M8 x 42mm Bolt (38)
M8 x 32mm Bolt (40)
M10 x 28mm Bolt (45)
M10 x 25mm Bolt (36)
5