The green Cache Active LED
cached data needs to be written to the drives. You must wait for this LED to turn
off.
4. From the Home page of SANtricity System Manager, select View Operations in Progress.
5. Wait for all operations to complete before continuing with the next step.
What to do next
Go to
Change the feature
Change the feature pack
You change the feature pack to convert the host protocol of the baseboard host ports, the IB HIC ports, or both
types of ports.
Procedure
1. From SANtricity System Manager, select Settings > System.
2. Under Add-ons, select Change Feature Pack.
3. Click Browse, and then select the feature pack you want to apply.
4. Type CHANGE in the field.
5. Click Change.
The feature pack migration begins. Both controllers automatically reboot twice to allow the new feature
pack to take effect. The storage array returns to a responsive state after the reboot is complete.
6. Confirm the host ports have the protocol you expect.
a) From SANtricity System Manager, select Hardware.
b) Click Show back of shelf.
c) Select the graphic for either Controller A or Controller B.
d) Select View settings from the context menu.
e) Select the Host Interfaces tab.
f) Click Show more settings.
g) Review the details shown for the baseboard ports and the HIC ports (labeled "slot 1"), and confirm that
each type of port has the protocol you expect.
on the back of each controller is on when
pack.
| Host port protocol |
100