Removal - Graco ThermoLazer 200 Operation

Screed Box ThermoLazer 200/200TC (FlexDie)

Removal

1. Shut off screed box burners.
Rear
2. Remove the two gas hoses from quick release cou-
plings (10).
10
ti22675a
3. Push in and turn spring loaded handle 90 degrees
and remove from yoke (31).
ti22676a
24
4. Remove bolt and slide FlexDie box off.
Front
ti122669a
10
BURN HAZARD
Make sure to use two hands when picking up screed
box. Place one hand on yoke and one hand on rod.
31
Do NOT pick up screed box with one hand and/or at
one location.
a
ti22677b
ti17047b
ti17048b
3A1319K