External Earth-Connection - Danfoss PVE 7 Series Technical Information

Technical Information
Electrohydraulic Actuators PVE-EX
Internal and external earth-connection

External earth-connection

26 | © Danfoss | October 2017
External earthing terminal enables a earth wire to be connected to the PVE-EX.
1. Crimp or solder the earth wire into the cable shoe.
2. Attach the cable shoe to the chassis via the M4 screw and the self-locking ring.
3. Tighten the screws to the specified torque 5 ± 2 N•m.
BC00000393en-US0102